Acroprint ATR240, Руководство пользователя

Страница: 11 / 21

Page 8
Ribbon Life
The ATR242 ribbon (39-0135-000) will typically last 3 months with 50 employees
punching 6 times per day (~18,000 punches). Actual ribbon life will vary based on the
number of punches, humidity, temperature, exposure to air.
Operational Battery Pack
The optional operational battery pack (58-0114-000) is a 12 cell NiMH (Nickel Metal
Hydride) battery pack that recharges when the ATR240 is plugged in. In the event of a
power failure the clock will instantly switch to battery power without any interruption in
service. The operational battery pack allows for full operation of the clock. The LCD
backlight is not activated when the clock is running on battery power as a power saving
feature, however the
LCD display is plainly visible in a lighted room.
Battery Pack Specs:
Voltage: DC 14.4v
Capacity: 1800mA
Standby mode: 30-36hr reserve power
Fully charged: 5 days use (300 punches/day)
Note: Actual battery life depends on many factors such as battery age, temperature,
discharge history, etc., and can vary greatly depending on these factors.
The ATR240 should be plugged in for 12 hours to fully charge the battery pack.
For more information see “ Installing the Operational Battery Pack” in the Appendix.
Warning:
Batteries may leak, overheat, catch fire or explode if proper safety & handling procedures
are not followed:
•
DO NOT get batteries wet
•
DO NOT place batteries near heat sources
•
DO NOT use any power supply other than the
original one supplied with the time recorder.
•
DO NOT inverse polarity connection
•
NEVER throw batteries into fire. Properly dispose of
batteries according to local rules and regulations.
•
DO NOT allow anything to short circuit the batteries
•
Dropping a battery may damage the battery.
Replace the battery if you suspect any damage.
Internal View
(Internal Control Panel)