acropaq APS26K, Руководство пользователя

Страница: 16 / 36

7 | Page
8. MAINTENANCE AND SERVICE
Attention! Maintenance work may only be completed when the power plug has been disconnected
from the power socket!
Emptying the Waste Bin
1) Disconnect the power plug from the power socket.
2) Remove the shredder attachment from the waste bin.
3) Empty the contents of the collection container in a suitable place.
4) Replace the shredder attachment back on the waste bin.
Note! It is recommended not to allow the waste bin to fill up against the cutting mechanism. This
prevents the shredded paper congesting and jamming in the cutting mechanism. Empty the waste bin
regularly.
Oiling the Cutting Mechanism
To ensure a long service life for your paper shredder, we recommend clearing any residue from the
cutting mechanism regularly and applying a little special oil for paper shredders on the cutting tool.
-
Each time the waste bin is emptied, apply several lines of the special oil in a lateral direction on a
suitable sheet of paper and feed this sheet through the shredder by setting the sliding switch to
Auto
.
-
As an alternative you can also use lubricant sheets. The oil, which is on a vegetable basis, is
impregnated in the paper and only escapes during the shredding process. This ensures simple,
clean use. Simply insert the lubricant sheet in the paper shredder infeed, shred it and then switch
the device to reverse running for approx. 10 seconds. The shredder is then ready for operation
again.
Attention!
It is forbidden to use oil spray from aerosol cans containing CFC!
Cleaning the Device
-
Clean the outside of the device with a slightly damp cloth.
Note! Do not use any aggressive cleaning agents. Never use any chemicals (e.g. cleaning solvent,
alcohol) to clean the housing.