Operation Manual, Nimbie USB Plus
Version 1.2
Rejected Discs
Nimbie USB Plus is designed to have
Rejected Discs come out underneath
the unit. Do not block the Reject Disc
Slot.
Periodically remove rejected discs so
that there is room to accommodate
more discs or raise Nimbie USB Plus
using the provided legs to increase
space underneath for more discs.
Important:
Nimbie USB Plus will stop operation if rejected discs
cannot go through the Reject Disc Slot.
More Than 30 Discs in One Session
Using the extension rods, Nimbie
USB Plus can process 100 discs
without refilling. To increase
capacity to 100 discs, please
follow the instructions below:
1)
Open the Blank Disc Storage
Lid.
2)
Remove the extension rods
from the lid’s underside.
3)
One after another align the
rods into the three holes on
the disc loader, then, gently
turn the rods
counterclockwise to make
sure that they are firmly
attached.
4)
Use a suitable box to raise
Nimbie USB Plus
approximately 96 mm high to
accommodate for the output of
100 discs.
5)
Use the alignment pad to
appropriately position the
Finish Disc Bin below the
Finish Disc Slot. The Finish
16
© 2012, Acronova Technology, Inc.
