If this archive file isn
’
t protected with a password, selecting it you
’
ll see the
previously created comment along with the
list
of stored
partitions
. If the file
is protected with a password, you
’
ll see the comment only.
In the next window you
’
ll be able to select one of the partition (disk) images
to connect as a temporary logical drive.
Selecting a partition and letter for a drive to be connected
A partition is selected by clicking the appropriate rectangle representing it. As
a result, the selected partition (rectangle) will become underlined red.
Another click will deselect the partition. You can select to connect several
partitions
simultaneously
. Each of them will be represented as a separate
logical drive with a letter assigned to it.
The same window will also allow to select a letter to assign to a drive to be
connected (
Drive letter for the selected partition
drop-down list).
If you want to change the letter assigned by default, you should select a
partition first by clicking it and then select a letter. (You can then select
another partition and letter if needed, etc.)
Acronis TrueImage
33
