Chapter 3. Installing the Appliance
3.4 Configuring the Appliance
Perform the following steps to configure the appliance:
1. Turn on the power: (a) press and hold down the main switch for five seconds, (b) press the power
buttons of each node.
2. Connect an admin laptop (from which you will configure the appliance) to the network. Assign a static IP
address to it from the same subnet that nodes are in, e.g., 10.20.20.100. As mentioned before, the
nodes have preconfigured IP addresses: 10.20.20.11 to 10.20.20.15.
3. On this computer, open a web browser and visit the default primary node IP address 10.20.20.11. The
wizard has been tested to work in the latest Firefox, Chrome, and Safari web browsers.
4. Once the configuration wizard is displayed, click
Configure
.
5. Review and accept the license agreement then click
Next
.
10
