10
Copyright © Acronis, Inc., 2000-2010
The disk management functionality is available, but there is no option to commit the changes
Besides disk management, only the recovery functionality is available.
To upgrade from the trial version to the standard product you do not need to re-download the
software. When the trial period is over, the product GUI displays a notification requesting you specify
a standard license key.
To specify the standard license key, use the
Change License
window in the management console, or
run the setup program and follow its instructions.
3.1
Changing a license
By changing the license, you switch to a different version or edition of the product. The following
table summarizes the available options.
Switching a license
Why you may need it
trial > full
Upgrade from trial to full product version
trial > trial different edition Define the edition that better fits your needs
trial > full different edition
The edition you bought differs from the edition of the trial version
You can also enable Acronis Deduplication and Acronis Universal Restore by using additional licenses,
if these are available for the version and edition you are switching to.
Switching between advanced and standalone editions is not possible.
To change a license:
1.
Click
Help
>
Change license
.
2.
Enter the new license key. If you have a license key for Acronis Universal Restore, you can add it
here.
Please do not forget that you cannot enable Acronis Universal Restore while using a trial product
version.
3.2
Upgrading components for Windows
To specify the standard license key, run the installation package and follow the wizard's instructions.
To upgrade to the full product version
1.
Start the setup program.
2.
Specify the standard license key instead of the trial license key.
Note:
The full license key must be of the same product edition as the trial license key.
3.
If you are planning to use Acronis Backup & Recovery 10 Universal Restore, specify the license
key for this feature. Otherwise, just click
Next
.
4.
Select one of the following options:
If you specified the license key for Universal Restore, click
Proceed with the installation
.
Otherwise, click
Apply the new license key and quit the Setup
.
The installed components are now upgraded to the full version.
