Acromag XVME-6700A Скачать руководство пользователя | Manualshive

Страница: 73 / 88

background image

XVME-6700A

USER

’S

MANUAL

Acromag, Inc. Tel: 248-295-0310

- 72 -

http://www.acromag.com

- 72 -

https://www.acromag.com

8.0 XVME-9640 Rear-Transition Accessory Module

The optional XVME-9640 module may be installed into the rear slot directly
behind the XVME-6700A to easily access all of the available I/O on the XVME-
6700A's P2, and optionally P0 connectors, as well as allow mSATA SSD
modules to be added for storage.

The following I/O is available on the front panel of the XVME-9640:

•

Two Gigabit Ethernet ports are available on the front panel's
optional RJ Point 5 connector (installed if the optional RJ0 connector
is installed). One adapter cable is included with the XVME-9640 to
connect from the front panel's RJ Point 5 connector to a standard
RJ45 connector. The adapter cable is also available separately (P/N
5028-568).

•

One VGA port via standard DB-15 connector.

•

One DVI-D port via standard 24-pin DVI connector.

•

Two USB 2.0 ports. These ports use standard USB-A connectors.

•

The Upper PMC/XMC module's P4 user I/O from the XVME-6700A's
P2 connector is available via a 68-pin SCSI-3 connector.

The following I/O is available via internal connectors on the XVME-9640:

•

Stereo Audio Line-In & Line-Out are available via a 5-pin connector.

•

One software-selectable RS-232/RS-485 serial port is available via a
10-pin header.

•

The Lower PMC/XMC module's user I/O from the XVME-6700A's
optional RJ0 connector is available via two optional high-speed
Samtec connectors (installed if the optional RJ0 connector is
installed).

The XVME-9640 also contains 2 mSATA sockets that allow 2 SSD drives to be
added while still remaining within a single VME slot. Using the software RAID
functionality of the QM87 PCH, these drives can even be setup as a RAID0/1
array if redundancy or extra speed is desired.

WARNING: mSATA power is supplied on P0 and requires P0 on both the
XVME-6700A and XVME-9640 for proper operation. Power is fused by a 2A
slow blow fuse on the XVME-6700A. Care should be taken to not exceed 2A
current draw. This may mean that only one mSATA can be used, depending
on model and size of the mSATA module.

Note:

The standard XVME-9640 cannot be used in a backplane that uses VITA

31.1 Ethernet. A custom build option is available that isolates the Ethernet
lines for use in a VITA 31.1 system. Please consult factory for this option.

«
...
71
72
73
74
75
...
»

Содержание XVME-6700A

























































































Отзывы:

Нет отзывов

Похожие инструкции для XVME-6700A

Smart-MPPT Li Series

Бренд: Y-Solar Страницы: 6

Бренд: Value Point Страницы: 7

Бренд: Danfoss Страницы: 32

PVG 16 PVH/Covers

Бренд: Danfoss Страницы: 112

Бренд: Danfoss Страницы: 44

PVG 16 PVH/Covers

Бренд: Danfoss Страницы: 144

Бренд: Danfoss Страницы: 2

Бренд: Danfoss Страницы: 64

Бренд: Danfoss Страницы: 8

VLT AutomationDrive FC 360

Бренд: Danfoss Страницы: 60

Бренд: Danfoss Страницы: 6

Бренд: Danfoss Страницы: 4

Бренд: Danfoss Страницы: 8

Бренд: Danfoss Страницы: 2

ECL Comfort 110

Бренд: Danfoss Страницы: 2

Бренд: Danfoss Страницы: 24

Бренд: Fagor Страницы: 10

Бренд: Fagor Страницы: 358

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды