Acromag IP445 Series, Руководство пользователя

Страница: 4 / 21

SERIES IP445 INDUSTRIAL I/O PACK 32 CHANNEL ISOLATED SSR OUTPUT MODULE
___________________________________________________________________________________________
- 3 -
•
No Configuration Jumpers or Switches - All configuration is
performed through software commands with no internal
jumpers to configure or switches to set.
INDUSTRIAL I/O PACK INTERFACE FEATURES
•
High density - Single-size, industry standard, IP module
footprint. Four units mounted on a carrier board provide up to
128 isolated output points in a single system slot. Both
VMEbus and ISA bus (PC/AT) carriers are supported.
•
Local ID - Each IP module has its own 8-bit ID signature which
can be read via access to the ID space.
•
8-bit I/O - Port register Read/Write is performed through 8 or
16-bit data transfer cycles in the IP module I/O space.
•
High Speed with No Wait States - Access times for all data
transfer cycles are described in terms of "wait" states - 0 wait
states are required for all read and write operations of this
model. See Specification section for detailed information.
SIGNAL INTERFACE PRODUCTS
(See Appendix for more information on compatible products)
This IP module will mate directly to any industry standard IP
carrier board (including Acromag AVME9630/9660 3U/6U non-
intelligent VMEbus carrier boards). Additionally, Acromag’s
APC8600 ISA bus (PC/AT) carrier board is also supported. A wide
range of other Acromag IP modules are also available to serve your
signal conditioning and interface needs.
The following cables and termination panels are also available.
Consult your carrier board documentation for the correct interface
product part numbers to ensure compatibility with your carrier board.
Cables
Model 5025-551-X (Shielded Cable), or Model 5025-550-X
(Non-Shielded Cable): A Flat 50-pin cable with female
connectors at both ends for connecting AVME9630/9660, or
other compatible carrier boards, to Model 5025-552 termination
panels. The “-X” suffix of the model number is used to indicate
the length in feet.
The unshielded cable is recommended for digital I/O, while the
shielded cable is recommended for optimum performance with
precision analog I/O applications.
Model 5029-900 APC8600 High-Density Cable: A 36-inch long
interface cable that mates the high-density (25mil pitch) 50-pin
I/O connectors of the APC8600 ISA bus carrier board, to the
high-density connectors on the APC8600 Termination Panel
(described below).
Termination Panels:
Model 5025-552: A DIN-rail mountable panel that provides 50
screw terminals for universal field I/O termination. Connects to
Acromag AVME9630/9660, or other compatible carrier boards,
via flat 50-pin ribbon cable (Model 5025-550-X or 5025-551-X).
Model 5029-910 APC8600 High-Density-to-Screw-Terminal
Termination Panel: This panel converts the high-density ribbon-
cable connectors coming from the APC8600 carrier board
(Acromag cable Model 5029-900) to screw terminals, for direct-
wired interfaces.
Transition Module:
Model TRANS-GP: This module repeats field I/O connections
of IP modules A through D for rear exit from a VMEbus card
cage. It is available for use in card cages which provide rear exit
for I/O connections via transition modules (transition modules
can only be used in card cages specifically designed for them).
It is a double-height (6U), single-slot module with front panel
hardware adhering to the VMEbus mechanical dimensions,
except for shorter printed circuit board depth. It connects to
Acromag Termination Panel 5025-552 from the rear of the card
cage, and to AVME9630/9660 boards within the card cage, via
flat 50-pin ribbon cable (cable Model 5025-550 or 5025-551).
INDUSTRIAL I/O PACK SOFTWARE LIBRARY
Acromag provides an Industrial I/O Pack Software Library
diskette (Model IPSW-LIB-M03, MSDOS format) to simplify
communication with the board. Example software functions are
provided for both VMEbus and ISA bus (PC/AT) applications. All
functions are written in the “C” programming language and can be
linked to your application. For more details, refer to the
“README.TXT” file in the root directory on the diskette and the
“INFO445.TXT” file in the appropriate “IP445” subdirectory off of
“\VMEIP” or “\PCIP”, according to your carrier.
2.0 PREPARATION FOR USE
UNPACKING AND INSPECTION
Upon receipt of this product, Inspect the shipping carton for
evidence of mishandling during transit. If the shipping carton is
badly damaged or water stained, request that the carrier's agent be
present when the carton is opened. If the carrier's agent is absent
when the carton is opened and the contents of the carton are
damaged, keep the carton and packing material for the agent's
inspection.
For repairs to a product damaged in shipment, refer to the
Acromag Service Policy to obtain return instructions. It is suggested
that salvageable shipping cartons and packing material be saved for
future use in the event the product must be shipped.
This board is physically protected
with packing material and electrically
protected with an anti-static bag during
shipment. However, it is recommended
that the board be visually inspected for
evidence of mishandling prior to
applying power.
The board utilizes static sensitive
components and should only be
handled at a static-safe workstation.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com