Acromag APCe7010E-LF Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 23

Acromag APCe7010E-LF Скачать руководство пользователя страница 5

AcroPack Series APCe7010E-LF

PCI Express Carrier Board

- 5 -

Model

Board Size

AcroPack Slots Operating Temperature

Range

APCe7010E-LF 2.711 x 5.158

inches

1

-40 to +85



C

(with 200 LFM airflow)

KEY APCe7010E-LF FEATURES

Interface for AcroPack modules

– The APCe7010E-LF provides an electrical

and mechanical interface for a mini-PCIe or AcroPack module. AcroPack
modules are available from Acromag. Mini-PCIe cards are available from other
vendors in a wide variety of input/output configurations to meet the needs of
varied applications.

Board Identification –

A unique carrier number can be set by a DIP switch.

This feature provides the capability to distinguish a particular AcroPack
module from others when multiple instances of the same module are used in
a system.

JTAG Programming Header –

A standard 14-pin Xilinx JTAG programming

header is provided for programming and debugging the FPGA on some
AcroPack modules.

Individually Fused Power

- Fused +1.5V, +3.3V, +5V, +12V, and -12V DC

power is provided. A fuse is present on each supply line serving each AcroPack
module. Fuses F1 - F3 are user replaceable. Fuses F4, F5 and F6 are not user
replaceable, you must return the board to Acromag to replace these fuses.

SIGNAL INTERFACE PRODUCTS

This AcroPack carrier board will mate directly to all industry standard mini-
PCIe and AcroPack modules. Acromag provides the following interface
products (all connections to field signals are made through the carrier board
which passes them to the individual AcroPack modules):

Cable

Model 5028-372 Round cable, shielded, SCSI-2 to CHAMP 0.8mm, 2 meters
long.

Termination Panel

Model 5028-378 DIN-rail mountable panel provides 50 screw terminals for
universal field I/O termination, SCSI-2 connector.

Software Support

The AcroPack series products require support drivers specific to your
operating system. Supported operating systems include: Linux



, Windows



,

and VxWorks



«
...
3
4
5
6
7
...
»

Содержание APCe7010E-LF
























Отзывы:

Нет отзывов