Acromag ACPC4610E/CC, Руководство пользователя

Страница: 7 / 22

ACPC4610E/CC User’s Manual CompactPCI Bus PMC Carrier
__________________________________________________________________
__________________________________________________________________________
Acromag, Inc. Tel: 248-295-0310 Fax: 248-624-9234 Email:solutions@acromag.com http://www.acromag.com
6
Table 2.2 indicates the pin assignments for the 32-bit CompactPCI bus
signals at the J1 connector. The connector consists of 25 rows of six pins
labeled A, B, C, D, E and F. Pin A1 is located at the lower right hand corner
of the connector if the board is viewed from the front component side.
Refer to the CompactPCI bus specification for additional information on
the CompactPCI bus signals.
Pin Row A Row B Row C Row D Row E Row F
1 +5V -12v
TRST#
+12V +5V GND
2
TCK
+5V
TMS
TDO TDI GND
3 INTA#
INTB# INTC#
+5V
INTD#
GND
4
IPM*PWR
HEAL*# V(I/0)
INTP INTS
GND
5
BR*A5 BR*B5
RST# GND GNT# GND
6 REQ# GND +3.3V CLK AD[31] GND
7 AD[30] AD[29] AD[28] GND AD[27] GND
8 AD[26] GND V(I/O) AD[25] AD[24] GND
9 C/BE[3]# IDSEL AD[23] GND AD[22] GND
10 AD[21] GND +3.3V AD[20] AD[19] GND
11 AD[18] AD[17] AD[16] GND C/BE[2]# GND
12 GND
13
KEY AREA
GND
14 GND
15 +3.3V FRAM# IRDY# BD SEL# TRDY# GND
16 DEVSEL# GND V(I/O) STOP# LOCK# GND
17 +3.3V
IP*SCL IPM*DA
GND PERR# GND
18 SERR# GND +3.3V PAR C/BE[1]# GND
19 +3.3V AD[15] AD[14] GND AD[13] GND
20 AD[12] GND V(I/O) AD[11] AD[10] GND
21 +3.3V AD[9] AD[8] M66EN C/BE[0]# GND
22 AD[7] GND +3.3V AD[6] AD[5] GND
23 +3.3V AD[4] AD[3] +5V AD[2] GND
24 AD[1] +5V V(I/O) AD[0]
ACK64#
GND
25 +5V
REQ64# ENUM#
+3.3V +5V GND
Notes:
1. Pound (#) is used to indicate an active-low signal.
2.
BOLD ITALIC
Logic Lines are NOT USED by this carrier board.
CompactPCI Bus
Connectors for J1
Table 2.2: CompactPCI
Bus J1 Connections
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com