ACPC4610E/CC User’s Manual CompactPCI Bus PMC Carrier
__________________________________________________________________
__________________________________________________________________________
Acromag, Inc. Tel: 248-295-0310 Fax: 248-624-9234 Email:[email protected] http://www.acromag.com
4
Upon receipt of this product, inspect the shipping carton for evidence of
mishandling during transit. If the shipping carton is badly damaged or
water stained, request that the carrier's agent be present when the carton
is opened. If the carrier's agent is absent when the carton is opened and
the contents of the carton are damaged, keep the carton and packing
material for the agent's inspection.
For repairs to a product damaged in shipment, refer to the Acromag
Service Policy to obtain return instructions. It is suggested that salvageable
shipping cartons and packing material be saved for future use in the event
the product must be shipped.
This board is physically protected with packing material and electrically
protected with an anti-static bag during shipment. However, it is
recommended that the board be visually inspected for evidence of
mishandling prior to applying power.
Refer to the specifications for loading and power requirements. Be sure
that the system power supplies are able to accommodate the power
requirements of the system boards, plus the installed Acromag board, within
the voltage tolerances specified.
In an air cooled assembly, adequate air circulation must be provided to
prevent a temperature rise above the maximum operating temperature and
to prolong the life of the electronics. If the installation is in an industrial
environment and the board is exposed to environmental air, careful
consideration should be given to air-filtering.
In a conduction cooled assembly, adequate thermo conduction must be
provided to prevent a temperature rise above the maximum operating
temperature.
The board is non-isolated, since there is electrical continuity between the
CompactPCI bus and PMC module grounds. As such, the field I/O
connections are not isolated from the system. Care should be taken in
designing installations without isolation to avoid noise pickup and ground
loops caused by multiple ground connections.
2.0 PREPARATION
FOR USE
UNPACKING AND
INSPECTION
WARNING: This board
utilizes static sensitive
components and should
only be handled at a static-
safe workstation.
CARD CAGE
CONSIDERATIONS
IMPORTANT: Adequate air
circulation must be
provided to prevent a
temperature rise above the
maximum operating
temperature.
Non-Isolation
Considerations
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
