10
Relay
(DO output)
do2.t
Relay 2 closing duration (s)
0 indicate relay is in keeping mode
do2.U
Usage of relay 2
io: used for switching (K);
AL: used for alarm output (J)
analog
Ao. Lo
Analog lower limit setting
0-100%
Ao.Hi
Analog upper limit setting
0-120%
Aol.U
/M
.
M corresponding output channel;
/M3, Ao1.U must be 1
1(A)
、
2(B)
、
3(C)
Measuring
range
SP-U(A)
Rated Input signal
Voltage: AC100, 220, 380V etc.;
Current: AC1, 5A etc.000
Password
PASS
Protective password programming
0000-9999
Note: Setting flow of each parameter see 5.3.4 Prog Menu; percentage is corresponding to the rated input
signal
5.3 Programming flow chart
5.3.1 In normal display frame, press SET key, as follows:
设置
SET
设置
SET
设置
SET
正常显示状态 rEAd Prog
Normal
Explanation:
rEAd - read only menu, at this page, press ENTER key Enter.
Prog - Programming menu, at this page, press ENTER key Enter.
5.3.2 rEAd menu
