2
ACLP 10-24 is DC24V power supply for AID150,
which uses a completely isolated linear transformer. It has
the characteristics of stable output voltage, small ripple,
high voltage withstand grade. It adopts the standard guide
way to install, and can be installed on the same guide way
near the residual current monitor.
2 Functional characteristics
2.1 Function characteristics of AIM-R100
Monitoring TN-S system real-time and display the residual current;
Monitoring the residual current transformer wiring short circuit, break line, and the failure alarm real-time;
Relay output, LED alarm indication and various fault indicator function;
Advanced field bus communication technology, and centralized alarm and display, communication, can
monitoring system operation condition real-time;
SOE function, it can record the time of the alarm and fault types, convenient operating personnel analysis
system running status, promptly eliminate malfunction;
Self-checking function, through the function test device of residual current detection function;
Remote reset function, can remote reset residual current monitor, eliminate the alarm message.
2.2 Function characteristics of AID150
Advanced field bus technology, which can be communicated with the residual current monitor;
Centralized alarm and display instrument can set the number of monitor and residual current alarm threshold
in system remotely;
When residual current exceeded threshold or connection failure, it provides sound and light alarm function,
and it can be eliminated;
Up to 16 AIM-R100 residual current monitors or AIM-M10, AIM-M100 insulation monitors can be monitored,
wall installation, apply to the operating room, ICU, or other places of centralized monitoring.
2.3 Function characteristics of ACLP10-24
Adopts linear transformer isolation, has strong anti-interference ability, low ripple;
AC 220V input and DC 24V output, the maximum output power is 3W;
Used to AID150 alarm and display instrument with DC24V power supply.
2.4 Function characteristics of AKH-0.66/L-20
Measurement precision is 0.2 class, ratio is 2000:1;
Measuring residual current in load with AIM - R100 residual current monitor.
