AKH-0.66P26 current
transformer
The AKH-0.66P26 type current transformer is the
protective current transformer
supporting the
AIM-M10 insulation monitor, of which the maximum
measurable current is 60A and the transformation
ratio is 2000:1. The current transformer is
directly fixed inside cabinet by screwing, and the
secondary side is leaded out by the terminal, which
is convenient to install and use.
AID series
external
alarm and
display
instrument
AID10
It is suitable for wall installation embedded in
operating room or nurse station and can monitor 1
AIM-M10 insulation monitor. It has sound and light
alarm function of insulation, overload,
overtemperature and equipment failure, and RS485
communication
AID150
LCD display, RS485 bus, centralized monitoring of
up to 16 SETS of AIM-M10 medical intelligent
insulation monitor data, sound and light alarm can
be remote. The AID150 can also monitor data from
multiple AIM-R100 residual current monitors.
2 Function features
2.1
Function features of AITR series medical isolation transformer
The transformation ratio between the primary and secondary windings is 1:1.
Double insulation treatment is adopted between the windings, and the electrostatic
shielding layer is designed.
The PT100 temperature sensor is installed in each wire packet to monitor the temperature
of the isolation transformer.
Used for the transformation of TN system into IT system (ungrounded system) after isolation
transformer.
2.2
AIM-M10 medical intelligent insulation monitor
Real time monitoring of IT system to ground insulation resistance, transformer load current,
transformer winding temperature, and give alarm indication when fault occurs;
The real-time monitoring system wire break fault, temperature sensor wire break fault and
function ground wire break fault, and give alarm indication when the fault occurs;
Relay output, LED indicator and other fault indication;