• The stove must not be modified from the manufacturer’s specification in any
way and the appliance must only be used for the purpose recommended by
the manufacturer.
• If the stove shows any signs of damage it is important that it is examined by
a qualified person.
• Failure to observe these instructions may result in electric shock or other
serious injury.
• Check the technical specification.
• Always ensure that all electrical work complies with the relevant Building
Regulations and the Electrical Code of Practice. All electrical work should be
carried out by a qualified electrician.
• If in any doubt contact your supplier or a qualified electrician.
To install the log and embers to the fuel bed ensure the appliance is
unplugged. Firstly remove the 8 screws that are located under the top
lid of the appliance. Once removed carefully lift off the top lid, place
the logs and embers onto the fuel bed as per the diagrams and replace
the top lid and screws when completed. Once you are happy with the
log layout, you can secure in place using the self adhesive sticky pads
provided if you prefer.
Installation Instructions
This stove must be installed by a competent person.
Installation of Logs & Embers
5
