Controls
THERMOSTAT
SYNC
TIMER
CHECK
ADAPTIVE
SELECT
CANCEL
SET
UP & DOWN
TIMER OFF
UP/DOWN temperature. For manual control, make
sure you have set your room temperature.
Starts to synchronize the time
Start timer set
Check setting timer and time zone
Switch adaptive function on/off
Select and confirm hour/minute/day setting
during sync and timer
Cancel sync or timer setting
Confirm all settings and send command
Arrow with clock symbol: select hour/minute/day
during sync and timer
Turn off time settings to use the manual control.
Once this button has been pressed it will delete all
programmed settings.
Adaptive Controls
Adaptive Control only works in conjunction with the timer programme.
When Adaptive Control mode is selected and turned on the fire monitors the
room temperature in relation to the selected target temperature.
If the room temperature is lower than the selected temperature the Adaptive
Control facility will instruct the fire to switch on between 2 to 5 minutes
earlier than the set time this is to ensure that the room is at the required
temperature at the selected time.
13
