Set up
To set up to 3 programmable timer settings
Press the TIMER button. To set the first time period press the SELECT button
to enter the TIMER 1 setting. The hour cursor will be blinking, use the time
arrow to find the time required and press SELECT button to confirm. Repeat
this for the minutes setting and followed by the required days setting.
It is important to use the arrow buttons to adjust the day cursor position,
then to use the SET button to choose the required day(s). DO NOT use the
SELECT button to choose the day(s) as the SELECT button moves onto the
next step and if no day (s) are selected the timer will not function. Whilst in
the day setting use the CANCEL button to remove any unwanted settings.
Once all the required times and day(s) have been selected press the SELECT
button to confirm these day(s). The next step, now the screen display will
show the hours cursor blinking. Select the required hour and then minutes
as before then press SELECT to confirm these times.
Press the TIMER button several times until the screen display shows the
setting on timer 2. Press the SELECT button, enter the timing settings for
period 2 in the same manner as period 1. Follow the same procedure for
time setting 3.
The main steps of the timer setting ~ timer on -> day -> timer off. These
three steps will close the loop.
In each time setting, the timer off setting needs to be at least 30 minutes
after the timer on setting.
Pressing the TIMER OFF button will turn off all the timer settings.
15
