ACR Electronics : 2846.0 страница 24 Скачать руководство пользователя | Manualshive

Страница: 24 / 44

background image

Y1-03-0233 Rev. L

23

6.

Changing ownership or contact information

As the owner of the beacon, it is your responsibility to advise the national
authority of any change in the information on the registration form. If you
are  transferring  the  beacon  to  a  new  owner,  you  are  required  to  inform
the national  authority.  You  can do this by using  their  online database  or
by  letter,  fax  or  telephone  and  informing  the  authority  of  the  name  and
address of the new owner.

The new owner of the beacon is required to provide the national authority
with  all  of  the  information  requested  on  the  registration  form.  This
obligation  transfers  to  all  subsequent  owners.  Registration  forms  for  the
United  States  are  available  from  NOAA  by  calling  (888)  212-7283  (212-
SAVE)  or  by  visiting  the  ACR  website  at

www.acrartex.com

. Outside of

the United States, the new owner may contact his local authority for the
necessary form(s).

7.

Lost or stolen EPIRBs

If your EPIRB is lost or stolen, do the following immediately:

//Report to your local authorities that the EPIRB has been lost or stolen
//Contact NOAA at (888) 212-7283 (212-SAVE), or your national

authority, with the following information:

o

Police department name

o

Police department phone number

o

Police case number

If  your EPIRB were to be  activated, the information  you provided  will be
forwarded  to  the  appropriate  search  and  rescue  authorities  who  will
ensure that your EPIRB gets back to you. If someone attempts to register
an EPIRB reported as stolen, NOAA or your  national authority will notify
the appropriate police department. Visit

www.cospas-sarsat.org

for more

detailed information.

8.

Servicing the SeaShelter

3

™ and the HydroFix™ HRU

The SeaShelter

3™

Category I bracket has two main pieces,

the  lid  and  the  base. To  open  the  bracket,  turn  the  spring
loaded  knob  counterclockwise  1/4  of  a  turn  and  pull.  The
lid  will  lift  away  from  the  top  of  the  base  and  disengage
from  the  detent  at  the  bottom  of  the  base.  The  lid  is
tethered to the base to help prevent loss.

Brackets are a key part of the overall beacon system. They
hold a beacon ready for deployment while preventing false
alarms.  Category  I  brackets  also  require  replacement  of
the Hydrostatic Release Unit every two years.

NOTE:

Whenever a beacon is returned for service, it

must be accompanied by the bracket.

«
...
22
23
24
25
26
...
»

Содержание : 2846.0













































Отзывы:

Нет отзывов

Похожие инструкции для : 2846.0

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды