
16
SYNCHRONY EQUIPMENT USER MANUAL
© COPYRIGHT 2015-2021, ACCELERATED CARE PLUS CORP., ALL RIGHTS RESERVED
CONFIDENTIAL AND PROPRIETARY
Timing
Manual timing
– the therapist controls the timing of the exercise duration (when the exercise starts and stops).
Other options include exercise duration based on time or number of repetitions.
Exercise parameters
Sound when marking repetition
–the system default is a sound when a repetition is marked. This can be set on or
off.
Show last peak on bar
– shadow of the prior repetition is displayed on the screen. This can be set on or off.
NOTE
– Isometric based exercises will allow the therapist access to rest time and isometric work time
Changing exercise visualization types
Multiple exercise visualizations are provided for each exercise. The default visualization has been found to be the
clinician’s choice when initiating the exercise with a new patient. Not all visualizations are available for each
exercise. The visualization examples displayed here are for the Effortful swallow exercise. A video demonstration of
each visualization is provided within the Help section of the software.
Pre-exercise process – Resting baseline
All initial exercises will start with a pre-exercise unless the clinician changes the setting. The resting baseline is
automatic, requesting the patient to remain still and quiet for 5 seconds. To capture the resting baseline manually,
select “Mark manually.” To skip the resting baseline, select “Skip baseline.”
Bar graph
– visualization of the intensity of
the exercise effort by the use of a bar graph
Trace display
– visible sEMG trace of the
shape (quality) and intensity of muscle
activity
Work-rest cycles
– adjustable on and off
exercise times to provide cues for timing and
or duration of muscle contractions
Kangaroo
– animated visualization of the
intensity of the exercise effort shown by a
kangaroo jumping and collecting coins
Automatic
- request patient to remain
and quiet for 5 seconds
Mark manually
– the therapist
controls the start and stop of the
resting baseline
Skip baseline
– the resting baseline
will be set at 10mv
Note
- when footplate is attached the
footplate command L-M-R are
displayed on the command boxes.
Содержание Synchrony
Страница 4: ......