OMNISTAND™ USER MANUAL
9
COPYRIGHT © 2016, ACCELERATED CARE PLUS CORP., ALL RIGHTS RESERVED.
Biocompatibility
All components and optional accessories of the OmniStand™ that the user might come in contact with when
using the device as intended are designed to meet the biocompatibility requirements of the applicable standards.
Training Requirements
Staff members who have gained their skills and expertise by means of professional medical training, professional
experience, or by means of instruction/training by the manufacturer are deemed able to assess relevant safety
regulations and recognize potential risks.
Do not operate this device until the User Manual has been carefully read and is understood.
Before you start the OmniStand™ exercise programs, consult the User Manual and understand the specific
Warnings and Precautions related to the safe use of the device.
Review and understand the section marked Operational Guidelines before operating the OmniStand™.
Review and understand the proper use of the device controls and proper setup, features, and adjustment
requirements of the OmniStand™.
A member of your ACP team will install and configure the device before training. ACP will conduct a train-the-
trainer style education process when the OmniStand™ is delivered.
During training:
o
Observe proper safety protocol by sufficiently securing patient per user manual instructions
o
Start to exercise slowly
o
Gradually increase exercise demands according to individual exerciser performances
o
Avoid overstraining exercisers
Exerciser Requirements
Exercisers/Users must be instructed by trained therapist on the correct and safe use of the OmniStand™. The
therapist is responsible for the safe and correct use of the device by the user.
o
The user's lower extremities are able to support his/her weight.
o
To stand in the OmniStand™ without assistance:
The user is able to stand and actively straighten their upper body and safely and
effectively maintain a sufficient upright posture during the exercise session.
o
If the user is able to control the OmniStand™ without assistance:
Make sure that a trained assistant supervises the training.
o
The OmniStand™ is not suitable for:
Diagnosis
Monitoring
Measuring
