background image

©2017 ACP, Inc.

Cedar Rapids, IA 52404

Page 13 of 16

Part No. 20000609

Revised 06/29/2017

User Options

Changing user options

Options such as single or double digit programming, beep volume, and maximum 

cooking time can be changed to suit individual preferences.

TO CHANGE OPTIONS OVEN STANDBY MUST DISPLAY:

1.  Press hidden pad.

•  Pad is unmarked and located to the direct left of Preheat On/Off pad.

•  Nothing will be displayed when hidden pad is pressed.

2.  Press Program Save pad.

•  The first user option will display. Oven is now in options mode.

3.  Press number pad that controls option to be changed.

•  See table below for options.

•  Current option will display.

4.  Press numeric pad again to change the option.

•  Each time pad is pressed, option will change.

•  Match code displayed with code for desired option.

•  To change additional options, repeat steps 3 and 4.

•  Changes take affect after pad is pressed. Press Program Save to save.

5.  Press Stop/Reset pad to return to STANDBY, or open and close oven door.

Didn’t like an option?

Factory settings are marked in bold. 

To change the oven back to the factory 

setting, simply select the option that is 

marked in bold. 

My changes weren’t 

saved.

In order for any changes to be 

saved, the Program Save pad 

must be pressed after selecting an 

option. Pressing the Stop/Reset pad will 

not save changes.

ON/OFF

TIME

 

ENTRY

POWER LEVEL

STAGE

PROGRAM SAVE

TEMP

 

ENTRY

HIDDEN 

PAD

HIDDEN PAD

NUMBERED PADS

DISPLAY

OPTIONS (FACTORY SETTINGS IN BOLD)

1

Double Digit Entry

Disabled

Enabled

Allows 10 (0-9) preprogrammed pads.

Allows 100 (00-99) preprogrammed pads.

2

Manual Time Entry

Disabled

Enabled

Manual time entry/cooking not allowed

Manual time entry/cooking allowed

3

Reset on Door Open

Disabled

Enabled

Opening oven door does not reset oven back to ready mode.

Opening oven door does resets oven back to ready mode.

4

Keybeep

Keybeep On

Keybeep Off

Keys beep when pressed

Keys do not beep when pressed

5

Keybeep Volume

Off

Low

Medium

High

Keybeep volume OFF.

Keybeep volume LOW.

Keybeep volume MEDIUM.

Keybeep volume HIGH.

End of Cook Signal

Solid Beep

3 Second Beep

4 Beeps Once

4 Beeps Repeating

Food done signal is a continuous beep until reset by user.

Food done signal is a three second beep.

Food done signal is four beeps, once.

Food done signal is four beeps, four times.

7

Keypad Active

15 seconds

30 seconds

60 seconds

120 seconds

Always

Keypad time entry window is 15 seconds.

Keypad time entry window is 30 seconds.

Keypad time entry window is one minute.

Keypad time entry window is two minutes.

Keypad time entry window is always active.

8

Preheat Warnings

Disabled

Program Warning Only

Preheat Warning Only

Both

Both temperature warnings off.

Warning only when preheat temperature does not match preprogrammed temperature

Warning only when actual oven cavity temperature is not to preheat temperature.

Both temperature warnings on.

TEMP PAD

Temperature Scale

Fahrenheit

Celsius

Temperatures are displayed in °Fahrenheit for 60Hz models.

Temperatures are displayed in °Celsius for 50Hz models.

STAGE PAD 

Clean Filter Message 

Frequency 

Disabled

Weekly

Monthly

Quarterly

Oven will not display “Clean Filter Message”

Oven will display “Clean Filter Message” every seven (7) days.

Oven will display “Clean Filter Message” every thirty (30) days.

Oven will display “Clean Filter Message” every ninety (90) days.

POWER LEVEL PAD

Microwave Only

Disabled

Enabled

Oven will not operate in “Microwave Only” mode.

Oven will operate in “Microwave Only” mode.

Содержание ACE series

















Отзывы: