©2017 ACP, Inc.
Cedar Rapids, IA 52404
Page 12 of 16
Part No. 20000609
Revised 06/29/2017
CAUTION
!
To avoid risk of burns, handle utensils, rack, and door with care. Allow oven, utensils, and rack to
cool before cleaning. Oven, utensils, and rack, become hot during operation.
Microwave Cooking
(microwave only)
To operate the oven for microwave cooking, you can use preprogrammed pads or manual time entry.
The following
instructions are for microwave cooking only.
For convection only or combination cooking, see that section.
Microwave Cooking Using Manual Cooking
Operation
1. Place food inside oven and close door.
2. Press Time Entry pad.
• Enter desired cooking time by using the numeric keypad.
3. Press Power Level pad .
• For a lower microwave power, press pads 1 (for 10%) through 9 (for
90%).
• Press numeric key pad for desired level. Press any numeric key pad
twice to set power level back to 100%.
4. If stage cooking is desired, press Stage pad and repeat
steps 2, and 3.
• Up to 4 different stages can be programmed.
5. Press the Start pad to begin the cooking cycle.
Microwave Cooking With Preprogrammed Pads
1. Place food inside oven and close door.
2. Press selected pad.
• If using single digit programming, press pad and oven begins automatically.
• For double digit programming, press pads in proper sequence and oven begins
automatically.
3. Cooking cycle begins
• Preprogrammed cooking program, total cooking time, cooking temperature,
percentage of microwave power, and stage are all displayed.
4. Oven finishes cooking sequence
• An end of cycle beep signals the end of the cooking cycle.
•
Done
shows in display.
Note:
Microwave Only option must be enabled from Options Settings on User Options page 13
