Turn the knob to
.
The days begin to flash.
Press
+
or
--
to make your choice,
OK
to confirm it and go to
the next setting.
Perform the same procedure to
set the hours and minutes. Turn the knob to exit
the setting mode.
Time setting
Day
Hours
Minutes
CF06 - Installation fault display
Turn the knob to exit the maintenance mode.
Communication fault with
the energy manager
Communication fault with
the electronic counter
Communication fault with
the Typhone 2 PLC
Installation fault
display
- 43 -
To remove receiver associations (reset the receivers).
• Press button
on the receiver for 1 minute.
The “TH” LED flashes and the association with
the transmitter is removed.
E
n
g
li
sh
2703593_rev1_Mise en page 1 17/07/2013 16:58 Page 44