On the receiver:
Press the
button for 5 seconds
until the receiver’s OK LED begins to flash slowly.
Press and release the
button.
The LED stops flashing.
The receiver is now associated with the selected zone.
Repeat the procedure for each zone. Press OK to exit
the association mode.
Press and release button
. The green LED stops
flashing. Receiver A is associated with zone 1 and load
shedding channel d=2.
Example:
Receivers A and B are associated
with zone 1.
Receiver A: load shedding channel
2 Receiver B: load shedding channel 3
Associating receiver A
to the load shedding channel 2.
On the transmitter:
Press
+
or
--
to select the load
shedding channel: d=2
On the receiver:
Press the
button for 5 seconds
until the receptor’s OK LED begins
to flash slowly.
Load-shedding
channel selection
Go to
the CF06
menu
- 41 -
E
n
g
li
sh
2703593_rev1_Mise en page 1 17/07/2013 16:58 Page 42