17
section of these instructions, or online at
www.argos-support.co.uk
If you still require further assistance, call one of our experts on
0345 600 3021
16
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the
Troubleshooting
Problem
Solution
Radio reception is poor:
• Fully extend the wire aerial to get the best reception and
sound quality.
• Rescan for radio stations, see page 12.
• Try moving your Tower speaker to another location to see if
reception improves.
• Check that you do not have other electrical equipment too
close to your Tower speaker, causing interference.
If you are experiencing problems with your Tower speaker, there are some quick and easy
checks that you can do, which may help to solve the problem.
Problem
Solution
No sound / power:
• Check that the mains power cable is plugged in to the wall
socket and the power is switched on.
• Check that you have switched the power switch on the back
of the Tower speaker to on.
• Check that you are not in Standby mode. Press and release
the silver control ring on the left hand side (Mode), or the red
button on the remote control, to power on the product.
• Check that you have not muted the volume. Press and
release the ‘Mute’ button on the remote control.
• Increase the volume.
• Check that the connected device is in playback mode.
• Check that you are in the correct mode for the music that
you wish to listen to.
Sound distortion:
• The volume level is too high. Please reduce the volume
level.
• The volume level of the connected device is too high. Please
reduce the volume of the connected device.
Unable to pair with a
Bluetooth device:
• Check that you are in Bluetooth mode. Press and release
the silver control ring on the left hand side (Mode) until ‘BT’ is
displayed. Alternatively press and release the ‘Input’ button
on the remote control until ‘BT’ is displayed on the Tower
speaker.
• Ensure that you are within range of the Tower speaker for
Bluetooth functionality,10 metres or less (33 feet or less).
• Move the Tower speaker and Bluetooth device away from
other Bluetooth devices/electrical equipment.
• If possible, turn off other nearby Bluetooth devices or
disable their Bluetooth functionality.
Aux in function failure
• You must first connect a 3.5mm audio input cable to the
AUX in socket on the back of the Tower speaker.
Troubleshooting
