7
section of these instructions, or online at
www.argos-support.co.uk
If you still require further assistance, call one of our experts on
0345 600 3021
6
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the
Troubleshooting
Your Acoustic Solutions Tower speaker
Setting up
1. Pull out the plastic safety strip on the remote control to activate the battery.
2. Plug the FM wire aerial into the ‘FM Antenna’ socket on the back of the Tower speaker.
3. Plug the power cable into the mains power wall socket and switch on.
4. Switch the power switch on the back of your Tower speaker to ‘On’. The white LED ring
on the front of the Tower speaker will now light up.
5. The Tower speaker is now in standby mode and ready to use.
Display
Tune up/Skip forwards
Remote control sensor
On-Off/Mode select
Tune down/Skip back
Play/Pause
Volume control
Front panel
Back panel
FM aerial socket
Left and right
line in sockets
Auxillary input socket
Power cable
Power on/off switch
Control ring
Remote control
Power on/Standby
Tune up/Skip forwards
Tune down/Skip back
Play/Pause
Input
Volume -
Treble -
Bass +
Mute
Bass -
Reset (bass and treble)
Battery compartment (at rear)
Requires 1 x CR2025 battery (supplied)
