10
DISPLAY
DISPLAY INFORMATION
The display information shown below on the TV
screen depending on the operation status.
PICTURE menu
SOUND menu
SETUP menu
TV SETTING menu
TV Display
Symbol
TURNING THE UNIT ON
When the AC power cord is connected, press the
STANDBY/ON
button on the unit to turn it on. Press
the
FUNCTION
button to select the desired mode (TV, AV1, AV2/SCART, YUV, HDMI or PC).
TURNING THE UNIT ON FOR THE FIRST TIME
The fi rst time you turn the unit on, it will go straight into Auto scan mode. Simply follow the screen
prompts as below to tune in the channels.
1. Use the
or
button to select the Country
you prefer.
2. Use the
button to select Auto tune.
3. Make sure RF aerial has been connected
properly to
TV ANTENNA
input jack on the
rear of the TV, press the button. The system
will automatically start to scan, sort and store
all available TV channels.
After scanning and sorting is fi nished, the TV will
display the fi rst stored channel.
UNIT OPERATION
ASTV3619WS-HDMI_E2-10.indd 10
ASTV3619WS-HDMI_E2-10.indd 10
8/13/2007 12:10:08 PM
8/13/2007 12:10:08 PM
