4
Using the Zentral Receiver’s built-in IR emitters
Zentral Receiver, Side View
The Zentral Receiver blasts IR commands in two
directions: up and forward. When you place the Zentral
Receiver, make sure there’s an unobstructed path
between it and the devices you want to control.
TV
Zentral
Receiver
Using the IR emitter wire
1. Plug the IR emitter wire into the IR Out jack on the
back of the Zentral Receiver.
IMPORTANT:
When using the built-in IR emitters, correct
placement of the Zentral Receiver is crucial. There must be a
clear line of sight between the front or top emitters and the
remote control sensor on the device(s) you want to control.
If you are placing the Zentral Receiver beneath a
device you want to control, put it slightly forward of
the device’s front panel. This gives the Zentral Receiver
a better angle to reach the device’s remote control
sensor.
