In addition, the Acoustat Corporation will continue to warrant the product at our option as long
as
it
is
In
service,
subject to the conditions below. Acoustat Corporation warrants to the owner that the Dynamlc
Woofer employed in the 2mH and 3mH will perform as
specified
and that it
will
be
free
of
defects in
materials and workmanship for a period
of
(2)
two
years
from the original date of manufacture.
Acoustat Corporation will repair defective units without charge for labor or
parts
subject to the following
conditions
a)
The
unit must not have been altered or damaged through misuse. abuse, negligence, accident. or
improper operation
b)
All
repairs must
be
undertaken at the factory
or
other service center designated by Acoustat
Corporation. Units submitted for warranty repairs must
be
shipped
in the factory packing carton to
Acoustat Corporation or its designated owner, and
will
be
returned to the owner freight and
insurance prepaid by Acoustat Corporatlon.
c)
Normal wear and maintenance am not covered
by
this warranty
d)
Fuses
have
not been bypassed
and only
fuses
of
the proper value
have
been used.
ACOUSTAT CORFORATION SHALL NOT
BE
RESPONSIBLE
IN
ANV
WAY FOR CONSEQUENTIAL OR iNDlRECT
DAMAGES OR LIABILITIES RESULTING FROM THE
USE
AND OPERATION
OF THE
PRODUCT COVERED HEREIN
OR
RESULTING FROM ANY BREACH OF
THIS
WARRANTY
OR
ANY
IMPLIED WARRANTY RELATING TO
THE
SAID
PRODUCT.
Some
states do not allow exclusion or limitation of incidental or consequential damages,
so
the above
limitation or exclusion may not apply to you.
Thls
warranty give you specific legal
rights
and
you
may
have other rights which vary from state
to
state.
SPECIFICATIONS
MODEL TWO/M- Frequency Response: 35-20 KHz
+/- 2 dB
;
Sound Pressure Level: 108 dB
18’ in a
14
x22 "
room. (Program Material Peaks); Minimum Power Requirements 100 Watts Per Channel; Nomlnal
Impedance:
4
Ohms
Power
Consumption: 5
Watts
(120v.
50/60
Hz); Control: High Frequency Balance
(Controls frequencies above 10 K Hz); Dimenslons
7 2
x
20“
x
3 1/2”;
Weight
81
Ibs.
(Net weight for one
speaker with Interface)
MODELTHREE/M-Frequency Response: 30-20K Hz
+/- 3dB
Sound Pressure Level: 1
10 dB 18’ in a 14'x22'
room. (Program Material Peaks); Minimum Power Requirements: 70 Watts Per Channel; Nominal
impedance:
4
Ohms Power Consumption 5 Watts (120v.
50/60
Hz);
Control: High Frequency Balance
(Controls frequencies above 10K Hz); Dimenslons
7 2 x 2 8 x
3 1/2";
Weight
98
Ibs.
(Net weight for one
speoker
with interface)
MODEL TWO/MH-Frequency Response:30-20KHz
+/-3
dB;Sound Pressure Level:
11OdB@
18 in a 14‘x22’
room.
(Program Material Peaks); Minimum Power Requirements: 40 Watts Per Channel; Nominal
Impedance:
4
Ohms Power Consumption: 5 Watts (120~
50/60
Hz);
Control: High Frequency Balance
(Controls
frequencles
above 10K
Hz);
Dimensions 7 2
x 20” x
3 1/2";
Woofer enclosure: 21“
x
18”
x
13‘; Weight 110
Ibs.
(Net weight
for
one speaker with interface)
MODELTHREE/MH-FrequencyResponse:30-2OKHz
+/-
3dB;Sound Pressure Level:
112dB@
18’ in a l4'x22'
room.
(Program Material Peaks): Minimum Power Requirements: 40
Watts
Per
Channel; Nominal
impedance:
4
Ohms
Power
Consumption:
5
Watts (120~
50/60
Hz);
Control: High Frequency Balance
(Controls frequencies above
10K
Hz);
Dimensions
7 2 ’ x 28” x
3 1/2 ";
Woofer enclosure: 21”
x
1 8
x
13;
Weight 127 Ibs. (Net weight for
one
speaker with Interface)