Acorn Mx-5100, Руководство пользователя

Страница: 19 / 43

19
3.8.1 Using the Buttons to Navigate Menus
Press the
‘Menu’
button to bring up the display menu.
3.8.1.1 Selecting Menu Options
The Level 2 Menu is shown below:
[Level 2 Menu] User 1 Node 1
VIEW DISABLE ENABLE
TEST DELAY TOOLS
STATUS
Press the

buttons to highlight the required menu option and then press the
✔
button to select it.
For example, press the

button followed by the

button to highlight the DELAY option (as shown below) and
then press the
✔
button to select this option.
[Level 2 Menu] User 1 Node 1
VIEW DISABLE ENABLE
TEST
DELAY TOOLS
STATUS
Press the
‘Esc’
button from within a menu option to return to the previous menu.
Press the
‘Esc’
button from the Main Level 2 Menu (shown above) to return to the normal operating display.
If a button is not pressed for one minute (15-seconds if the panel is in a fire alarm condition) the display will
automatically revert to the normal operating display. Press the
‘Menu’
button to return directly to the Level 2
Menu display previously shown.
3.8.1.2 Selecting Individual Zone Numbers
When the display is showing a list of Zone Numbers, it is possible to select a specific zone number by using the
number keys. For example, if the display is showing a list of zones:
[ Inputs] More>
Zone Mode Location
0001
Enabled BASEMENT WEST
0002 Enabled BASEMENT EAST
0008 Enabled GROUND FLOOR
0009 Enabled MAIN RECEPTION AREA
To select a particular Zone, move to the zone number column. The existing zone number will then be
highlighted.
Enter the required Zone Number using the number buttons, for example 12.
[ Inputs] More>
Zone Mode Location
# 12 Enabled BASEMENT WEST
0002 Enabled BASEMENT EAST
0008 Enabled GROUND FLOOR
0009 Enabled MAIN RECEPTION AREA
Finally press the
✔
button to confirm. The display will then show a new list of Zones with the selected Zone
highlighted at the top of the list.
If the number is entered incorrectly, press the
‘Esc’
button.
www.acornfiresecurity.com
www.acornfiresecurity.com