Acopia ARX 1000, Руководство по установке оборудования

Страница: 56 / 78

Chapter 6
6 - 8
; System UUID 876616f6-79ac-11d8-946f-958fcb4e6e35
; ip private vlan internal 1002 metalog 1003 subnet 169.254.94.0 255.255.255.0
;
config
logging level all info
exit
...
If the failed switch was a member of a Resilient-Overlay Network (RON),
you can alternatively use
show ron
from any other RON member. This
shows the UUID even if the chassis is no longer online. For example, the
following command (run on another switch in the RON) shows the UUID
for a failed chassis, “prtlndA1k.” Again, the UUID is highlighted in bold
text:
bstnA6k# show ron
Switch Name HA Peer Switch Uptime
Status UUID Management Addr
------------------------------------------------------------------------------
bstnA6k (None) 0 days, 02:02:47
ONLINE d9bdece8-9866-11d8-91e3-f48e42637d58 10.1.1.7
provA5c (None) 0 days, 02:01:04
ONLINE db922942-876f-11d8-9110-8dtu78fc8329 10.1.38.19
prtlndA1k prtlndA1kB 0 days, 00:30:53
OFFLINE
876616f6-79ac-11d8-946f-958fcb4e6e35 10.1.23.11
bstnA6k# ...
Applying the UUID
The initial-boot script has a prompt for the UUID (shown in the example
above). This is where you enter the UUID of the replaced switch. For
example,
...
The UUID should only be entered if this chassis is replacing a failed chassis
and the entered UUID should match the UUID of the failed chassis.
11. Enter the chassis's UUID
in the format
xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx.(default=6df0854c-6af4-11d8-954a-f844c83bc5f3) #
876616f6-79ac-11d8-946f-958fcb4e6e35
...
Important
No two running chassis should ever share the same UUID. Only enter the
UUID in a switch-replacement scenario.