Acnodes PC 6150, Руководство пользователя

Страница: 58 / 74

PC 6150 User’s Manual
A.2.6 PNP/PCI Configuration
This section describes the PCI bus system configuration. PCI or
Personal Computer Interconnect is a system which allows I/O devices
to operate at speeds nearing the speed of the CPU when
communicating with its own special components. This section covers
some very technical items, and it is strongly recommended that only
experienced users should make changes to the default settings.
Phoenix – Aw ard BIOS CMOS Setup Utility
PnP/PCI Configurations
Reset Configuration Data Disabled
Item Help
Resources Controlled By Auto(ESCD) Menu Level
f
X IRQ Resources Press Enter
PCI/VGA Palette Snoop Disabled
Select Yes if you are
using a Plug and play
capable operating
system select No if you
need the BIOS to
configure non-boot
devices
ÇÈ
Æ Å
: Mo ve Ent er: Se le ct + /- /P U/ PD: Va lue F 10 : Sa ve ESC: Exit
F1 : Gen era l H elp
F5 : Previous Value s F6: Fa il- Saf e Defaults F7: Optimized Defaults
Reset Configuration Data
Normally, this field is “Disabled” . Select “Enabled” to reset Extended
System Configuration Data (ESCD). When exiting Setup or installed a
new add-on, the system reconfiguration has caused such a serious
conflict that the operating system cannot boot. The options available are
Enabled and Disabled.
Resource controlled by
The Award Plug and Play BIOS has the capacity to automatically
configure all of the boot and the Plug and Play compatible devices.
However, this capability means absolutely nothing unless using a Plug
and Play operating system such as Windows
® 98. The options available
are Auto and Manual.
PCI/VGA Palette Snoop
Leave this field at “ Disabled” .
The choice: Enabled, Disabled.
Appendix
49