Acnodes PC 5170, Руководство пользователя

Страница: 78 / 192

PC 5170 Flat Panel PC
Step 2:
Locate the DIMM socket on the motherboard near the right of the chassis. Push
down on the white levers of the socket until the DIMM module is dislodged from
the socket (
Figure 4-8
).
Figure 4-8: DIMM Socket Clip Locations
Step 3:
Slowly slide the new DIMM module along the plastic guides at both ends of the
socket. Press the DIMM module down into the socket until it clicks into position
and the two handles have automatically locked the memory module into place.
Step 0:
4.5 PSU Module Replacement
Please read the warnings at the beginning of
Section 4.3
before attempting to access any
PC 5170 internal components.
If the PSU module has been damaged it must be replaced. To replace the PSU module,
please follow the steps below.
4.5.1 Remove the Old PSU
Step 1:
Step 2:
Step 3:
Remove the back cover (
Section 4.3.1
).
Detach and remove the elevated platform (see
Section 4.3.2
).
Disconnect all PSU connections including those to the motherboard (
Figure 4-9
)
and any disk drives.
Page 75