ACME zoopa Q evo 550, Инструкция по эксплуатации

Страница: 34 / 61

34
Fixed height Evo Mode Home
Lock
To activate a function on the left, the
right switch has to be set to 0=Fixed
height.
L0 + R0: Starting without GPS
L1 + R0: No Descent
L2 + R0: Startpoint-orientated flight
Fence = Virtual Fence
This mode limits the distance on 150m
on the horizontal and 80m on the vertical
line.
Camera Roll
This rotary switch enables a tilt axis
control of an optional camera gimbal.
First flight
To have the full support while flying, we recommend to activate GPS. Switches have to be set as followed:
Left 0 + Right 1
Also check the previous section
„10 points before flight“
Beginners!
Activate the D/R button after you have switched on the controller. The beginner mode will be confirmed with a
beep sound. Speed will be reduced now.
Please note that the quadrocopter reacts oppositely if it is flying towards you. When moving the stick to the
left, the model flies to the right – when moving the stick to the right, the zoopa Q Evo 550 flies to the right!
Limit yourself on Position hold, forwards and backwards fly at the beginning.
Start
Set both flip switches (left and right) to „0“.
Wait for the flash of the blue LEDs inside the GPS tower, beginners shall wait a bit longer for an extended
GPS-support.
To start the motors, pull down the left stick into the right corner and wait for the motors to start running. Then
release the stick, so it returns into center position.