ACME zoopa Q evo 550, Инструкция по эксплуатации

Страница: 32 / 61

32
Rotor protectors
Rotor protectors are included. They differ in A/B remarks. The marks are placed between the two screw bits.
Rotorprection A
= Black cap
Rotorprotection B = Silver cap
Unmount the 2 screws that hold the white LED board on the arm. Attach the rotor protection instead and fix it
with the screws.
We highly recommend to mount the rotor protectors if you are a beginner as these prevent damages on the
model!
10 Steps before flight
Do not ignore these points. They ease you to start and fly the model safely.
1. Sign a Model-flight insurance:
Since 2005, an insurance for RC models is required. Obtain information from your local RC club or
dealer and through the local model association.
2. You need a special approval for commercial flights.*
3. Get the permission from the owner of the area you are flying in.*
4. Check the allowed flight height - especially in airport areas!*
Especially check the allowed flight height in areas close to airports and make sure you hold a minimum
distance of 1500m. Regularly, the allowed max. height is 100m.
5. Make sure that the LiPo- battery is fully charged and in good condition.
6. Check the controller batteries as well. Replace them after 10 flights.
7. Check other components like the landing gear or screws, make sure that they are fixed firmly.
8. Check all propellers. Tighten the spinners with the supplied wrench. Check the motors ease of
movement and the condition of the propellers. Remove dirt. Replace damaged propellers!
9. Safe starting position
Make sure that the position offers at least 5 meters free space in all directions and that no power plants
or other obstacles may disturb the flight. Avoid airfields with high-voltage power lines.
10. GPS-Signal allocated?
!!Wait until the initialization is completely finished!!
DEFINITELY note, that the GPS-signal has to be refound after EVERY location change!
Disregard may lead to a „FlyAway“ – a return flight to the previous start point.