XP-1200F
5-
2. Installation
Unpacking the fixture
(for flight case pack only)
1. Stop the flight case via the brake sheet above the
wheels.
2. Unlock the lock modules and move the cover away.
3. Take out the fixture.
Installation:
1.
Unscrew A, set up the tripod.
2. Unscrew B to adjust the height of the tripod,
after that lock screws B well.
3.
Take off the screw C, install the fixture via its
screw holes on the bracket and lock screw C
well.
Attention:
y
Always ensure that the structure to which you are attaching the unit is secure and is
able to support a weight of 10 times of the unit’s weight.
y
Always ensure that the unit is firmly fixed to avoid vibration and slipping while
operating.
y
The equipment must be fixed by professionals.
XP-1200F
14-
1.
DIMMER
BLACKOUT button
: Press this button to blackout the unit.
2.
DIMMER
OPEN button
: Press this button, the dimmer will obtain max. Value.
3.
IRIS CLOSED button
: Press this button, the light iris will become the smallest.
4.
IRIS OPEN button
: Press this button, the light iris will become the biggest.
5.
FIXED COLOURS & RAINBOW switch
: Turning the switch on the
COLOR SCROLL
position, enable the rainbow function, you can set different rainbow speed by pressing
COLOUR buttons
from slow to fast. Turning the switch on the
FIXED COLOUR
position, enable the fixed colors function and disable the rainbow function. They will
save last setting automatically in each step.
6.
COLOUR buttons
: There are 9 color buttons of white, red, green, blue, purple, golden
amber, 2900k, 5600k and 4800k. Select the light beam colors by pressing the relative
color buttons.
7.
COLOUR TEMPERATURE switch
: Adjusting this switch to obtain 3 kinds of color
temperature: Standard 6500K, frost and 2800K.
8.
DIMMER slider
: Adjusting the slider from 0% to 100% position, the light beam will
become stronger and stronger till the dimmer reach 100%.
9.
SHUTTER slider
: Adjusting the slider from slow to fast position, the strobe speed will
change from slow to fast.
10.
IRIS slider
: Adjusting the slider from min. to max. position, the light beam size will
become bigger and bigger till the iris opened fully.
11.
FOCUS slider
: Adjusting the suitable focus by pushing this slider from left to right.
7.3 DMX Controller
If you use a universal DMX controller to control the units, you have to set DMX address