ACME Stag Par MP-200, Руководство пользователя

Страница: 12 / 20

11A
Display Inverse
Select the , press the ENTER button and the display will blink. Use the ENTER button to
change the display mode between (Display normal) and (Display Inversion,
good for installing in the ceilings). Press the ENTER button to setup. Back to the functions
without any change press the MENU button.
White Balance
Select the , press the ENTER button and the display will blink. Use DOWN and UP
button to select the (Red), (Green) or (Blue), press the ENTER button to
confirm, then use DOWN and UP button to adjust the value from to , press the
ENTER button to store, automatically return to the main functions without any change after
one minute.
Manual Test
Select the , press the ENTER button, and use the DOWN and UP button to select
(Red), (Green) or … or (strobe), press the ENTER button to confirm and use
the DOWN and UP button to adjust the value. Once select press the ENTER button to setup
or automatically exit menu mode without any change after one minute. To go back to the last
function without any change press the MENU button.
Auto Test
Select the , press the ENTER button and the unit will run the built-in programmer for
self-test. To go back to the functions press the MENU button.
Fixture Temperature
Select the , press the ENTER button and the display will show the temperature of the
unit. To go back to the functions press the MENU button again.