ACME Stag Par MP-200, Руководство пользователя

Страница: 10 / 20

9A
(Dimmer 255); select the (Color 10), press the ENTER button, and select the
(Red), (Green),… (Dimmer), pressing the ENTER button and adjust the
brightness intensity from to .
When you selected the (Fade mode), press the ENTER button, and then use the
DOWN and UP button to adjust the fade speed from (Speed 1, the slowest) to
(Speed 3: the fastest).
Once you have finished the settings, press the ENTER button to setup or automatically exit
menu mode without any change after one minute. To go back to the last function without any
change press the MENU button.
Dimmer Mode
Press the MENU button up to when is showing on the display. Pressing the ENTER
button and the display will blink. Use the DOWN and UP buttons to select the
(Dimmer Mode 1: Optically Linear) or (Dimmer mode 2: Square Law) or
(Dimmer mode 3: Inverse Square Law) or (Dimmer mode 4: S-cure) mode. Once the
mode has been selected, press the ENTER button to setup or automatically return to the main
functions without any change after one minute. To go back to the functions without any
change press the MENU button again.
Optically Linear: The increase in light intensity appears to be linear as DMX value is
increased.
Square Law: Light intensity control is finer at low levels and coarser at high levels.