ACME Stag Par MP-200, Руководство пользователя

Страница: 11 / 20

10A
Inverse Square Law: Light intensity control is coarser at low levels and finger at high levels.
S-cure: Light intensity control is finger at low levels and high levels and coarser at medium
levels.
Sound Mode
Select the , press the ENTER button and the display will blink. Use the DOWN and UP
button to select the (Sound mode on) or (Sound mode off). Once select, press
the ENTER button to setup or automatically exit menu mode without any change after one
minute. To go back to the functions without any change press the MENU button
Sound Sense
Select the , press the ENTER button, use the DOWN and UP button to adjust sensitivity
level between (the lowest) and (most sensitive). Press the ENTER button to
setup or automatically exit menu mode without any change after one minute. To go back to
the functions without any change press the MENU button.
Blackout mode
Select the , press the ENTER button and use the DOWN and UP button to select the
(blackout) or (normal). Press the ENTER button to setup or automatically exit
menu mode without any change after one minute. To go back to the functions without any
change press the MENU button.
LED display
Select the , press the ENTER button and the display will blink. Use the DOWN and UP
button to select (LED display always on) or ( LED display off 20 seconds after
exit menu) mode. Once select, press the ENTER button to setup or exit menu mode without
any change after one minute. Back to the functions without any change press the MENU
button again.