8. Power Cable:
Used to connect the main power supply.
9. DMX input:
For DMX512 link, use 5-pin XLR cable to link the unit together.
10. DMX output:
For DMX512 link, use 5-pin XLR cable to link the unit together.
11/12. Ethernet Connectors:
Used to transfer fixture’s information to a main controller.
5.2 Main Functions
To select any functions, press the MENU button until the required one is shown on the display.
Select the function by ENTER button and the display will blink. Use the DOWN and UP button to
change the mode. Once the required mode has been selected, press the ENTER button to setup or
it will automatically return to the main functions without any change after idling one minute. Back
to the functions without any change press the MENU button.
The main functions are shown below:
8C
