Slave Mode
Select Slave Mode, press the ENTER button to confirm, present mode will blink on the display. Use
the DOWN and UP button to select the Master or Slave mode. Once the mode has been selected,
press the ENTER button to save. Hold and press the MENU button about one second or wait for
one minute to exit the menu mode.
Note:
Only when selected the “Master Slave” in the “Black Out” function, the “Slave Mode”
function will be effective.
Black Out
Select Black Out, press the ENTER button to confirm, present mode will blink on the display. Use
the DOWN and UP button to select the Master Slave (Master/Slave mode) or Blackout (blackout
mode) or Last State (If the DMX signal is lost, the fixture will stay in the last DMX set up.). Once
the mode has been selected, press the ENTER button to save. Hold and press the MENU button
about one second or wait for one minute to exit the menu mode.
Display Settings
Enter menu mode, select Display Settings, press ENTER button to confirm, use UP/DOWN button
to select Backlight Intensity, Backlight Auto Off, Display Inverse or Language.
Backlight Intensity
Select Backlight Intensity, press the ENTER button to confirm, present mode will blink on the
display, use the UP/DOWN button to adjust backlight intensity from 1 (dark) to 10 (bright),
press the ENTER button to save. Press the MENU button back to the last menu or let the unit
idle one minute to exit menu mode.
Backlight Auto Off
Select Backlight Auto Off, press the ENTER button to confirm, present mode will blink on
the display, use the UP/DOWN button to select Yes (display goes off one minute after exiting
menu mode) or No (display always on), press the ENTER button to save. Press the MENU
button back to the last menu or let the unit idle one minute to exit menu mode.
10C
