5
3.2 Master/Slave Operation
The units can be linked together in a daisy chain in master/slave mode to perform
pre-‐programmed lighting shows triggered by the music.
In Master/Slave mode refer to the DMX settings below:
Master unit:
DMX start address MUST be set to 001. (First DIP switch = ON, all others are OFF)
Slave units:
DMX start address may have any value but NOT 001 (example: set the first 3 DIP
switches to ON)
3.3 Easy CA-‐8 Controller
The easy CA-‐8 remote control is used only in master/slave modes. By connecting
to the remote socket of the first unit you will find that the remote controller on
the first unit will control all the other units in Stand by, Function and Mode.
Stand by
Blackout the unit
Function
1.Synchronous Strobe
2. Sound Strobe
Select show
Select Gobo
Mode
Strobe (LED OFF)
Show(LED ON)
LED blinking
