ACME Eventx 100, Руководство пользователя, Страница: 15 / 32

DMX Settings
Press Menu button 2 seconds if the display is locked, else one impulsion on the Menu button is necessary to access to
the first menu. The display will show “ DMX Setting ”
Use the UP / DOWN buttons to select DMX Address , RDM Device ID or Channel Mode.
DMX Address
With this function, users are able to set the DMX start address to the projector.
DMX Address selected :
- Press the ENTER button to confirm.
- Use the UP / DOWN button to adjust the address from 001 to 512 .
- Press the ENTER button to store.
- Press the MENU button back to the last menu or let the unit idle one minute to exit menu mode.
RDM Device ID
With this function, users will find the ID of the device to run it with RDM function.
RDM Device ID selected :
- Press the ENTER button to confirm.
- The display will show the ID.
- Press the
MENU button back to the last menu or let the unit idle one minute to exit menu mode.
Channel Mode
With this function, users are able to set the number of channel he needs to run the device. More channels
means more functions are enable.
Channel Mode selected:
- Press the ENTER button to confirm.
- Use the UP / DOWN button to select 5 Channel, 7 Channel or 8 Channel .
- Press the ENTER button to store.
- Press the MENU button back to the last menu or let the unit idle one minute to exit menu mode.
DMX State
Press Menu button 2 seconds if the display is locked, else one impulsion on the Menu button is necessary to access to
the first menu. Press Enter button, the display will show “ DMX Setting ”
Use the UP / DOWN button to select DMX State . Press the ENTER button to confirm.
Use the UP / DOWN button to select Black Out , Last state or Master/Slave.
Black Out
This function will switch off the light if the device receive no DMX signal.
Black Out selected:
- Press the ENTER button to confirm.
- Press the MENU button back to the last menu or let the unit idle one minute to exit menu mode.
Last State
This function will let the device in the last state when he receives no DMX signal.
Last State selected:
- Press the ENTER button to confirm.
- Press the MENU button back to the last menu or let the unit idle one minute to exit menu mode.
Master/Slave
With this function, users are able to run Show Program.
- Press the ENTER button to confirm.
- Press the MENU button back to the last menu or let the unit idle one minute to exit menu mode.
14
A