ACME CB-16TC, Руководство пользователя

Страница: 10 / 10

9-
control on) or off (sound control off) mode. Once selected, press the ENTER button to store.
Back to the main functions without any change press the MENU button (or wait for 8
seconds to exit menu mode).
Sound Sense
Press the MENU button up to when the Sound Sense is showing on the display. Press
ENTER button and the display will blink. Use DOWN and UP button to adjust the sound
sensitively (1-100) of the unit. Once the value has been selected, press the ENTER button
to store. Back to the main functions without any change press the MENU button (or wait for
8 seconds to exit menu mode).
Black Out
Press the MENU button up to when the Black Out is showing on the display. Pressing
ENTER button and the display will blink. Use DOWN and UP button to select the yes (yes
blackout) or no (no blackout) mode. Once selected, press the ENTER button to store. Back
to the main functions without any change press the MENU button (or wait for 8 seconds to
exit menu mode).
Back Light
Press the MENU button up to when the Back Light is showing on the display. Pressing
ENTER button and the display will blink. Use DOWN and UP button to select the on (back
light on) or off (back light off 1 minute after auto show) mode. Once selected, press the
ENTER button to store. Back to the main functions without any change press the MENU
button (or wait for 8 seconds to exit menu mode).
Fixture Reverse
Press the MENU button up to when the Fixture Reverse is showing on the display. Pressing
ENTER button and the display will blink. Use DOWN and UP button to select the yes or no .
Once selected, press the ENTER button to store. Back to the main functions without any
change press the MENU button (or wait for 8 seconds to exit menu mode).
Auto Test
Press the MENU button up to when the Auto Test is showing on the display. Pressing
ENTER button and the display will show Test… and the unit will run self-test by built-in
program. To go back to the functions press the MENU button.
10-
White Balance
Press the MENU button up to when the White Balance is showing on the display. Press
ENTER button and the r 255 will blink, press UP and Down button to adjust the value, press
ENTER button to store and g 255 will blink on the display, press UP and Down button to
adjust the value, press ENTER button to store and b 255 will blink on the display, press UP
and Down button to adjust the value, and press ENTER button to store. Back to the main
functions without any change please press the MENU button.
Fan Speed
Press the MENU button up to when the Fan Speed is showing on the display. Pressing
ENTER button and the display will blink. Use DOWN and UP button to select Auto Speed
(When the temperature of the unit under 40 , FAN stops; between 45 ~55 , FAN runs at
℃ ℃ ℃
half speed; above 60 , FAN runs at full speed. The LEDs
℃
will be off if the temperature
higher than 75
℃
) or High Speed, press ENTER button to store. To go back to the functions
press the MENU button.
Fixture Temp
Press the MENU button up to when the Fixture Temp is blinking on the display. Pressing
ENTER button and the display will show the temperature of the unit. To go back to the
functions press the MENU button.
Fixture Time
Press the MENU button up to when the Fixture Time is blinking on the display. Pressing
ENTER button and the display will show the number of working hours of the unit. To go back
to the functions press the MENU button.
Firmware Version
Press the MENU button up to when the Firmware Version is blinking on the display.
Pressing ENTER button and the display will show the version of software of the unit. To go
back to the functions press the MENU button.