ACL OR-MD Series, Руководство пользователя

Страница: 14 / 24

12
5.4 Repairs
Diligent testing of the unit is guaranteed by the manufacturer. He is responsible for safety-related characteristics within
the legal limits only if repairs and modifications are performed by personnel authorized and trained or supervised by ACL
and if the unit and its accessory are used according to the rules of the intended use. Therefore, there are warranty seals
on or in your unit. Once a seal is broken an expiring warranty has to be assumed. Service personnel may be trained and
certified by ACL only.
After being trained by ACL GmbH you can execute the agreed service activities, for example exchanging several compo-
nents, on your own. Please contact the manufacturer at the address in section 6 for training and advisory as well as the
service manual.
Incorrect repairs are a safety risk. You should not apply your own setting or adjusting methods if they do not comply with
the unit’s specifications or use components not supplied or approved by ACL GmbH because that might damage the unit.
Finally, it is not allowed to make any changes or modifications in the unit or take actions to boost performance beyond
the original settings without the manufacturer’s permission.
There is one fuse for every phase of your unit. It’s characteristics are:
Manufacturer
Model
Schurter AG
5x20mm SPT series
Operating Voltage
Ampere Rating 4A
Characteristic
Breaking Capacity
1,5 kA @ 250 VAC
10 kA @ 125 VAC
250 VAC
T
To change a fuse remove the cover ( orange ) on your mains filter like indicated on the picture. Thereafter, you can remove
and replace your fuse.