Acksys WLg-IDA/NP[H4], Быстрое руководство по установке

Страница: 19 / 20

-9-
SPECIFICATIONS
Power supply
Number of external power
inputs
Power1, Power2
PoE (/NP V1 and /N V2 version)
Type
Wide DC power range, from 9V to 36V,
6W min, reverse polarity protection.
Connector
A single 6-point header receiving a
removable straight spring-cage
connector.
Ethernet interface
Number of ports 2
Type of ports
10 Base-T or 100 Base-TX
Automatic negotiation (HDX/FDX, 10/100
Mbps), auto MDI/MDI-X
Connectors RJ-45
POE
On the first port, as “powered device”
when using WLg-IDA/NP
Wi-Fi interface
Radio mode IEEE 802.11a/h, 802.11b, 802.11g.
Data rates
802.11a/h: 6 to 54 Mbps
802.11b: 1 to 11 Mbps
802.11g: 1 to 54 Mbps
ATHEROS Super AG mode: Up to 108
Mbps (would only work in situation where
both ends of the link are using the same
ATHEROS chipset).
Frequency band for 802.11a
5 GHz
(channels 36 to 48, 52 to 64, 100 to 140, 149 to
161)
Frequency band for 802.11b/g
2.4 GHz
(channels 1 to 14), allowing 3 non-overlapping
20 MHz channels
Information given for standard
model (100mW radio card)
802.11b 802.11g 802.11a
Tx output power (Radio card
output)
20 dBm @1-11M
20 dBm @6-24M
18 dBm @36M
17 dBm @48M
15 dBm @54M 20 dBm @6-24M
17 dBm @36M
16 dBm @48M
13 dBm @54M
Rx sensitivity (Radio card input)
-92 dBm @1M
-87 dBm @11M -90 dBm @6M
-70 dBm@54M -90 dBm @6M
-70 dBm@54M
Information given for H4 model
(400mW radio card)
802.11b 802.11g 802.11a
Tx output power (Radio card
output)
24 dBm @1-11M
23.5 dBm @6-24M
21 dBm @36M
20 dBm @48M
19.5 dBm @54M 22.5 dBm @6-24M
21.5 dBm @36M
19 dBm @48M
18 dBm @54M
Rx sensitivity (Radio card input)
-97 dBm @1M
-98 dBm @11M -91 dBm @6M
-74 dBm@54M -91 dBm @6M
-72 dBm@54M
Antennas
The supplied antennas are
articulated omnidirectional
+2dBi female RPSMA stick
antennas. The 2nd antenna is
only used for spatial diversity.
2 male connectors RP-SMA MAIN and
AUX.
In non H4 version, the AUX connector
can remain unused, but must be covered
by the supplied protection cap.
In H4 version, the AUX connector must
be used, otherwise the product may be
irreparably damaged. It must receive an
antenna (or a 50 ohms terminator).
Warning: channels lists and max transmit power allowed depends of local regulations.