-
14
-
AP mode only
Network topology
Infrastructure
Security
WEP, WPA (2)-PSK, WPA (2) with
802.1x authenticator, SSID visibility
status
Client/Bridge mode only
Network topology
Infrastructure, ad-hoc modes
Security
WEP, WPA (2)-PSK, 802.1x
supplicant. AES/TKIP/WEP by
hardware encryption
Mesh mode only (supported only with type 1 radio card)
Network topology
802.11s
Security
SAE/AMPE
Power supply
Coding serie A:
24V
nom
, 48V
nom,
72V
nom,
96V
nom,
110V
nom,
DC
Wide range dual input power supply,
from 24V to 110VDC according to all
EN50155 nominal voltages, polarity
protection; 4-pole M12 plug A coding,
Power supply requirement 25W.
Coding serie B:
12V
min
-36V
max
DC
Dual input power supply, from 12V to
36VDC (supports as well EN50155
24VDC nominal voltage), polarity
protection; 4-pole M12 plug A coding.
Power supply requirement 25W.
Electrical connection
requirement
The circuit breaker must have a
nominal current In compatible with the
needed RailBox power (twice larger)
Also, the circuit breaker must have a
supported inrush current of 10xIn
Coding serie P:
PoE
+
These products must be powered by a
PoE+ (802.3at type 2 class 4) power
source connected to
LAN2
Wi-Fi interface
Number of interfaces
2
Radio mode
Support for IEEE 802.11a/h, 802.11b,
802.11g, 802.11n and 802.11ac
Modulation rates
802.11ac: up to 1.3 Gbps
802.11n: up to 450 Mbps
802.11a/h: 6 to 54 Mbps
802.11b: 1 to 11 Mbps
802.11g: 1 to 54 Mbps
Frequency range for
802.11a/n
5 GHz; 5.150 to 5.850 GHz
Frequency range for
802.11b/g/n
2.4 GHz; 2.412 to 2.484 GHz
Antenna plugs
(Antennas not provided)
QMA-type female antenna plugs
1 radio:
3 antenna connectors
2 radios:
6 antenna connectors
