-
5
-
Wireless interface
The RAILBOX has two WIFI Interfaces whose modes depend of the chosen
model.
Refer to the «
REFERENCES
» chapter to know the WiFi mode
supported by your WiFi 1 and WiFi 2 interfaces.
The two WiFi interfaces can work alone or simultaneously
Upon delivery, the default factory settings are:
Access point mode
SSID “
acksys
”
No security
Automatic radio channel
Setup the Wireless
:
a.
Be sure that the WIFI interface is enabled (Green color)
b.
Click on
Edit,
to set Wireless essential parameters:
Customize your Wireless interface according to
:
The operating mode: Access point, client (bridge)
Wi-Fi parameters: 802.11 mode, radio channel, SSID
Wi-Fi security parameters (WEP, WPA, WPA-PSK, WPA2, WPA2-
PSK, SSID broadcast or not)
You will find a complete description of all modes in the
WaveOS user
guide
.
Warning:
Save your settings by clicking "
Save & Apply
”.
Otherwise your settings will be lost if the product has to restart
FINAL INSTALLATION
6. Install the device
Place the device in an appropriate place. The device can be
installed outdoor. Check that all the connectors are protected
thanks to a cable or a cap.
7. Install the antennas
Insure that their
position and radiation pattern
allow proper
communication with the peer Wi-Fi devices.
Specifically, insure that there are
no obstacles
between the
device and its peers (“line of sight” concept).
