Ack!Industries dAck! 2.0 Скачать руководство пользователя страница 8

 

8

Warranty 

 

¾

 

30 day limited warranty on batteries 

¾

 

1 year parts and labor limited warranty 

 

Batteries are covered for one month from date of purchase.  Batteries will be replaced 

within the 30-day warranty period in the event of failure to supply 4 hours of continuous power 
after having had 24 hours of continuous float charge.  The warranty coverage does not apply in 
the event of battery misuse (i.e., deliberate deep discharge), incorrect connection, or use of 
batteries for devices other than the Ack! Industries dAck!. 
 

The parts and labor warranty covers defects in materials and workmanship in your dAck! 

2.0, excluding batteries, for up to one years from the date of purchase.  Warranty service or 
replacement will be provided free of charge in the event of component failure.  This does not 
cover neglectful use, utilization in a way not specified in this manual, or normal wear and tear 
(surface finish, humidity, etc.).  In the event of service need, the customer is responsible for 
transport costs to and from factory, and assuring safeguards such as adequate packaging, correct 
anti-static precautions, and insurance provisions. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

All questions and concerns should be directed to Ack! Industries 

WWW: http://www.ack-industries.com 

E-mail: [email protected] 

Содержание dAck! 2.0













Отзывы: