12
The assembly process is simply the reverse:
7.
Insert the new battery pack part-way into the chassis.
8.
Attach the quick-release clasp lock on your new battery pack to the termination inside the
dAck! 2.0. Ensure that the clasp has engaged, however
do not apply too much pressure
.
9.
Move the battery pack all the way into the chassis and replace the front and rear chassis
plates, making sure not to leave any loops of internal wire dangling outside.
10.
Carefully insert the threaded rod all the way through the dAck! 2.0 making sure it does not
pinch any wires against the battery pack. The rod will protrude out of the back by several
millimeters if inserted correctly.
11.
Replace the washer and the thumb nut and tighten the nut down.
Do not overtighten!
The nut
should be tight enough so that the plates are flush with the chassis and do not move.
12.
Turn the power switch on. If the blue LED illuminates, you are back in business.
Congratulations, your dAck! 2.0 is ready to go.
